Updated October 2026
Marsden sits between Kingston and the growth corridor to the south, and its roofs belong firmly to the older half of Logan. The suburb filled out with single-storey, concrete tile housing, and those roofs are now at the age where the mortar has gone and the tile surface has worn through.
The symptoms arrive in a familiar order. First, grey crumbs of old pointing in the gutters after heavy rain. Then ridge caps that look slightly crooked from the footpath. Then a tile or two out of line where a cap stopped holding them. Then, eventually, a ceiling stain in the room under the ridge. Catching it at stage one is a repointing job. Catching it at stage four means repairs, and sometimes a plasterer as well.
A full restoration on a Marsden roof covers the clean, the tile repairs, rebedding and repointing with flexible compound, then sealer and a membrane coating. The flexible pointing is the part that matters most for longevity, because the original rigid cement was always going to crack as the roof moved through decade after decade of Queensland summers.
Marsden also has its share of investment housing, so the quote frequently goes to an owner who is not standing in the room. The roofers we work with will itemise what they found and what they propose, which makes that conversation much easier.
Gutter and downpipe work that ties into the stormwater drainage is licensed plumbing and drainage work in Queensland at any value, not just above the $3,300 building work threshold. If gutters are part of your job, that part goes to a licensed roof plumber.
Frequently asked questions
What does repointing cost on a Marsden house?
Guide pricing only: roughly $2,000 to $3,500 for full ridge and hip lines on an average single-storey home, with rebedding adding to it. Small patches are usually a minimum callout. See the cost guide.
Will repointing stop the ceiling stain spreading?
If failed ridge mortar is where the water is getting in, yes. If the entry point is a cracked tile, a rusted valley or a flashing, that needs its own fix. The inspection finds the actual source before anyone quotes.
Can the roof be done in stages?
Yes. Repairs and repointing first, coating later, is a common way to spread the cost. It is slightly more expensive overall because the access gear is set up twice.